| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| ’59 Less Paul II http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=14950 |
Page 1 of 1 |
| Author: | bob J [ Fri Dec 14, 2007 2:16 am ] |
| Post subject: | |
Did gibson ever make the guitar with alder or swamp ash body. If so, what difference in sound from Mahogany? |
|
| Author: | JJ Donohue [ Fri Dec 14, 2007 3:07 am ] |
| Post subject: | |
Bob...why start a new thread...ask the LP question in the existing thread. It's already too confusing with more than one LP thread. Thanks |
|
| Author: | bob J [ Fri Dec 14, 2007 8:41 pm ] |
| Post subject: | |
Sorry JJ, Not intended to confuse,. Please feel free to remove it and place it where you deem appropriate |
|
| Author: | bob J [ Fri Dec 14, 2007 8:45 pm ] |
| Post subject: | |
Ps, the reason I started a new thread is that the origional thread seems to be turning into a discussion of the merits of 'hand carved' v CNC, a topic for which I have no intrest. |
|
| Author: | erikbojerik [ Sun Dec 16, 2007 7:42 am ] |
| Post subject: | |
I've seen LPs with swamp ash tops....not sure if that applies to the entire body. Alder, probably not. I've never heard a swamp ash LP, but the few I've seen looked pretty cool...just a clear-coat finish, nothing fancy. |
|
| Author: | bob J [ Sat Dec 22, 2007 11:40 pm ] |
| Post subject: | |
Thank all. Was really wondering what effect different body woods have or may have on the classic Mahog LP sound. |
|
| Author: | bob J [ Sat Dec 22, 2007 11:42 pm ] |
| Post subject: | |
Classic mahog body used for lam. back and top sound |
|
| Author: | RobE [ Sun Dec 23, 2007 3:57 am ] |
| Post subject: | |
I'm building an electric right now that is made out of a swamp ash body. I chose it most for the fact that I wanted a really nice grain which I could clear coat. But from what I can recall of my research on the wood (which was almost 2 years ago) was that Swamp Ash would be right between Alder and Mahogandy tonally. It would not be the warm sound that mahogandy gives, but it would not be super bright like alder. But since my guitar isnt finished (the first one always seems to take the longest), I can't really tell you how it actually sounds. I'm just going off what others have told me. |
|
| Author: | JJ Donohue [ Sun Dec 23, 2007 4:35 am ] |
| Post subject: | |
Bob...I'm in the process of a mahogany body under a curly maple top. I can't tell you the difference between this vs. other woods but I'll bet there is more that is influenced by the pickups and strings used. I significantly chambered the inside and probably reduced the weight by 40-50%. I'll be interested in comparing the unamplified sound with a solid model. I would expect to get a different flavor. |
|
| Author: | SniderMike [ Sun Dec 23, 2007 5:27 am ] |
| Post subject: | |
[QUOTE=RobE] ...but it would not be super bright like alder.[/QUOTE] ??? I have not found alder to be super bright at all. Just my experience though. |
|
| Author: | bob J [ Sun Dec 23, 2007 6:16 am ] |
| Post subject: | |
Hey, great info. everyone!! Thank you all, |
|
| Author: | Mattia Valente [ Tue Dec 25, 2007 12:14 am ] |
| Post subject: | |
Try a PRS Swamp Ash Special vs. a regular flavour one. They have very different electronics, but you should be able to get a feel for the differences. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|